1
→
Adolanium/hermes-gadget-sdk
Build voice and text devices for your Hermes Agent, with ESP32 firmware, a Linux client, and a desktop simulator.
About Adolanium/hermes-gadget-sdk
Adolanium/hermes-gadget-sdk is an open-source project on GitHub, mainly written in C++. Build voice and text devices for your Hermes Agent, with ESP32 firmware, a Linux client, and a desktop simulator. It currently holds 297 stars and 44 forks with 0 open issues, and was last pushed on an unknown date (repository created unknown).
Project Overview
AI Homed tracks it on the Today's Trending board, currently at rank #75 with 0 new stars today.
GitHub Repository Details
README
Hermes Gadget
Hold a button. Ask Hermes. Hear the answer.
A small device for your own Hermes Agent, with its tools, memory, and skills.
Set up a board · Try the simulator · Read the docs
The desktop simulator runs the same device core. No board needed to try it.
Choose your starting point
| I have a board | I want to try it first | I want to build with it | |---|---|---| | Open the browser installer | Start the desktop simulator | Explore the SDK | | Install over USB, connect Wi-Fi, and pair with your Hermes. | Try a scripted demo, then connect your own Hermes. | Add a board, device actions, sensors, or your own face. | | Chrome or Edge, a USB data cable, 2.4 GHz Wi-Fi, and Hermes. No firmware toolchain. | Python 3.10+, CMake 3.16+, and a C++17 compiler. | Start with the development guide and tests. |
What you can do
- Talk and listen. Hold TALK to speak, release to send, and hear your Hermes reply.
- See what is happening. Read replies, answer confirmation questions, and receive cards from your agent.
- Let Hermes act. Expose the gadget's LEDs, sensors, and other controls as agent tools.
Supported hardware
Hermes Gadget runs on ESP32-S3 boards and Raspberry Pi 4/5, with a desktop simulator for trying it without hardware. See Supported hardware to compare boards, controls, audio, and setup options.
Hardware ports remain experimental until a complete physical verification report is recorded for the exact revision. Check the verification table before choosing a board.
Try the demo from a checkout
Already have Python, CMake, and a compiler? Start here.
In your activated environment at the repository root:
python -m pip install -e ".[dev]"
hermes-gadget build-sim --test
hermes-gadget devserver --pairing
In a second terminal with the same environment activated:
hermes-gadget sim --url ws://127.0.0.1:8765/gadget --board sim-466x466-round
Type approve in the first terminal, using the code on the device. Type a message in the simulator to receive a streamed echo. The desktop guide covers platform-specific prerequisites and live audio.
On the screen
| Ready | Listening | Thinking | Speaking |
|:---:|:---:|:---:|:---:|
| | 
| 
| 
|
These images show the simulator's device display. The simulator guide covers its desktop controls, board profiles, and scripted runs.
Find the right guide
| Use a gadget | Build with the SDK | |---|---| | Choose a starting point | Development and tests | | Set up a board | Add a board, actions, or sensors | | Try the simulator | Customize the face | | Run a Linux gadget | Hardware verification | | Connect Hermes | Architecture | | Talk, type, and interrupt | Protocol | | Change Wi-Fi or update firmware | Hermes integration reference | | Remote access with Tailscale Funnel | | | Troubleshooting | Hardware and wiring |
Project status
See the changelog for release highlights and contributor credits.
Releases include prebuilt firmware for the profiles listed in that release. Newly merged profiles need a source build until the next release. After the first USB flash, hermes gadget update installs new firmware over the air. A build that cannot reach Hermes rolls itself back.
The simulator and firmware share a portable C++17 core. CI tests the core, Python tools, installer, and plugin against a real Hermes gateway, and builds every supported board. The development guide describes the test suites and pinned Hermes version.
After installing firmware, you can configure Wi-Fi from your phone through the gadget's temporary network. USB setup remains available. Wake-word activation is not included.
The Home Assistant and MQTT examples expose a configured lamp and temperature sensor through a Linux gadget. They include pairing instructions, fixed action targets, asynchronous completion and local integration tests.
Contributing
Bug reports from real boards, new boards, fixes, and docs are welcome. Read CONTRIBUTING.md. Report security problems privately through SECURITY.md.
Affiliation and trademarks
Hermes Gadget is an independent, community-made project. It is not affiliated with, endorsed by, sponsored by or supported by Nous Research.
"Hermes", "Hermes Agent", "Nous Research" and the Hermes Agent mascot (the girl with the headphones, sometimes called "Nous Girl") are trademarks or brand assets of Nous Research. They appear here only to describe compatibility with Hermes Agent.
License
Project code and documentation are licensed under the MIT license.
Third-party dependencies, adapted drivers, and artwork retain their respective licenses. See Third-party licenses and attribution and NOTICE for details.
The MIT license grants no rights to Nous Research's names or marks.
GitHub Stars & Activity
297Stars
44Forks
0Open issues
C++Language
GitHub Popularity
GitHub stars297
Forks44
Open issues0
Primary languageC++
License-
Stars gained today0
Created-
Last pushed-
Trending History
Daily boardrank #75 · ▲ 0 stars
Related AI Projects
→2
→3
→4
→5
→6
→7
→8
→